830 Series in 10", 18", and 36"
Prods for testing standard and high density bales (requires H-4 Handle).
830-2 - 10" prod
830-3 - 18" prod
830-4 - 36" prod
830-5 - 12" for hops
H-4 Handle
Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.
831 Short Pin Prod
For testing hay in the windrow (requires H-4 Handle).
1986 Bale Sensor
For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with model FX-2000. Also available as 1986/40 with 40’ cable for larger balers.
MCS-4
This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST.
FX-2000
This state-of-the-art meter is ideal for high-volume producers who need the time-saving convenience of on-the-go monitoring. Whether in the windrow, on-the-go while baling, or in the bale, the FX-2000 gives clear, accurate moisture readings every step of the way!
F-2000
The F-2000 is great for hay producers looking to enhance quality control. The F-2000 checks hay moisture in the windrow or in bales, and comes with the same accuracy and clarity as the FX-2000!
PFS 100 Pound Applicator
This applicator will hold 100 lbs of Silo Maxx or Silo Maxx Special. It is run by a 12-volt, variable speed motor that can be controlled in the cab.
PFS 300 Pound Applicator
This applicator will hold 300 lbs. of Silo Maxx or Silo Maxx Special. It is run by a 12-volt, variable speed motor that can be controlled in the cab.
From Gandy
This 45 lb. capacity applicator precisely delivers Silo Maxx on forage or grain. Available with 1-4 straight spouts and a precision cam gauge to regulate the openings in the bottom, which allows you to apply the recommended rate for your individual operation. Comes standard driven by a 12-volt motor.
From Gandy
This 100 lb. capacity pplicator precisely delivers Silo Maxx on forage or grain. Available with 1-4 straight spouts and a precision cam gauge to regulate the openings in the bottom, which allows you to apply the recommended rate for your individual operation. Comes standard driven by a 12-volt motor.
PFS Premium Blower
This blower will attach to PFS’s 100 or 300 lb. applicators, along with attaches to Gandy’s 45 or 100 lb. applicators. It is used when applying Silo Maxx or Silo Maxx Special with round balers, large square balers, or in-line balers and is driven by a 12-volt motor.
From Intense Inoculation Systems
The Intense Inoculant applicator is designed to apply liquid inoculant at the blower or on the baler or chopper. This applicator is designed to apply water soluble inoculant at the rate of .25 tons per minute to 2.20 tons per minute and is run on a 12-volt system. The intense applicators hold enough inoculant for 50 tons of forage and can be easily removed for refrigeration of unused inoculant.
From Ag Choice
This applicator can be used for silage inoculant or for cover crop applications. It is powered multiple ways, either by 12-volt battery or by 18-volt cordless Milwaukee, DeWalt or Makita batteries.